BRILAC is an air-drying alkyd resin paint. The use of polyurethane and silicone-reinforced resins results in coatings with above-average weather resistance and gloss retention. The result is chalking-resistant, abrasion-resistant, highly covering and filling paints with high surface hardness and good elasticity. BRILAC Coatings have a good resistance to water, detergents, oils, greases, petrol (short-term), etc. By adding up to 15 BRILAC hardeners, the values of hardness, drying, abrasion resistance, petrol and solvent resistance can be increased even further.

BRILAC brightener is a high-gloss alkyd resin clear coat with very good weather resistance and gloss retention. The result is a high-gloss, chalking resistant and abrasion-proof coating with high surface hardness and good elasticity. BRILAC is used both as a topcoat clearcoat for metallic colours and to refresh matt finishes or as an additional protection and high-gloss finish for solid colours. BRILAC can also be used as a lacquer addition during the last spraying cycle (20–60 %) to achieve an optimal spraying result.

BRILAC is an air-drying alkyd resin paint. The use of polyurethane and silicone-reinforced resins results in coatings with above-average weather resistance and gloss retention. The result is chalking-resistant, abrasion-resistant, highly covering and filling paints with high surface hardness and good elasticity. BRILAC Coatings have a good resistance to water, detergents, oils, greases, petrol (short-term), etc. By adding up to 15 BRILAC hardeners, the values of hardness, drying, abrasion resistance, petrol and solvent resistance can be increased even further.

Isocyanate containing reactive thinner for synthetic resin spray paints. Accelerates drying and through-drying and increases abrasion resistance, hardness, gloss and petrol resistance. Addition up to a maximum of 15 %. The hardener remains active for about 12 hours. If this time is exceeded, new hardener can be added.

BRILAVIT is an extremely fast drying one-coat paint based on modified alkyd resins. BRILAVIT produces abrasion, shock and impact resistant coatings with excellent adhesion to iron and steel and shows good resistance to water, detergents, oils, greases, petrol (for short periods) etc. The advantages such as fast drying, high covering and filling power as well as good corrosion protection through the use of special rust inhibitors make BRILAVIT a popular one-coat paint system.

BRILAVIT is an extremely fast drying one-coat paint based on modified alkyd resins. BRILAVIT produces abrasion, shock and impact resistant coatings with excellent adhesion to iron and steel and shows good resistance to water, detergents, oils, greases, petrol (for short periods) etc. The advantages such as fast drying, high covering and filling power as well as good corrosion protection through the use of special rust inhibitors make BRILAVIT a popular one-coat paint system.

BRILACEL is a fast-drying and weather-resistant industrial paint on a nitro synthetic resin base. BRILACEL gives a hard, shock and impact resistant surface finish with good elasticity. The adhesion is excellent and the resistance to water, detergents, petrol, oils and greases is good.

BRILALUX is an air-drying, cold-curing 2-component paint based on acrylic polyurethane (DD). It meets the highest requirements in terms of chemical and mechanical resistance. BRILALUX produces hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc. BRILALUX coatings are weatherproof with excellent lightfastness, gloss and chalking resistance. The coatings are equivalent to baking enamels of the best quality.

BRILALUX is a chemically curing 2-component industrial thick-film coating based on acrylic polyurethane (DD). It is characterized by a very high filling and covering power combined with excellent direct adhesion to a wide range of substrates (metals and plastics). The use of active anti-corrosion pigments enables easy corrosion protection on iron and steel. BRILALUX produces hard and abrasion-resistant surfaces with good resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids, alkalis, etc. The coatings are characterized by good light fastness, gloss and chalking resistance.

BRILALUX is a chemically curing 2-component industrial thick-film coating based on acrylic polyurethane (DD). It is characterized by a very high filling and covering power combined with excellent direct adhesion to a wide range of substrates (metals and plastics). BRILALUX produces hard and abrasion-resistant surfaces with good resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids, alkalis, etc.

BRILALUX is an air-drying, cold-curing 2-component structure paint (grain effect) on an acrylic polyurethane (DD) basis for rational and decorative application. It meets the highest requirements in terms of chemical and mechanical resistance. BRILALUX produces hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc. Depending on the spraying technique, different structural effects can be achieved and minor unevenness of the substrate can be evened out. BRILALUX coatings are weatherproof with excellent lightfastness, gloss and chalking resistance.

BRILALUX is an air-drying, cold-curing 2-component structure paint (grain effect) on an acrylic polyurethane (DD) basis for rational and decorative application. It meets the highest requirements in terms of chemical and mechanical resistance. BRILALUX produces hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc. Depending on the spraying technique, different structural effects can be achieved and minor unevenness of the substrate can be evened out. BRILALUX coatings are weatherproof with excellent lightfastness, gloss and chalking resistance.

BRILAFER hammer finish is an air-drying and thixotropic industrial paint, with which effective and mechanically resistant coatings can be achieved. Due to the special hammerblow-like structure and the good filling power, excellent results can be achieved even with smaller unevenness of the substrate.

BRILAFER 2K-DD hammer finish is a cold-curing 2-component acrylic-polyurethane paint for highest demands on chemical and solvent resistance as well as mechanical resistance. Due to the special hammerblow-like structure and the good filling power, excellent results can be achieved even with smaller unevenness of the substrate.

BRILADUR coatings result in very resistant, scratch-resistant and effective wrinkle varnish surfaces. Resistance to dilute acids, petrol, solvents, etc. is excellent.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

ACQUATOL is a water-dilutable, quick-drying spray paint for weather-resistant and chalking-resistant coatings.

ACQUAPUR ACR 2K-finishing enamel gloss is a water-dilutable top coat based on polyurethane resin for exterior and interior use. ACQUAPUR ACR stands out in particular very high surface hardness and scratch resistance, good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well a very good colour and gloss retention.

ACQUAPUR DS 2K-finishing enamel silky gloss is a water-dilutable top coat based on polyurethane resin for exterior and interior use. Produces thick-film surfaces, both smooth and structured. ACQUAPUR DS stands out in particular very high surface hardness and scratch resistance, good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well a very good colour and gloss retention.

ACQUAPUR DS 2K-finishing enamel satin matt is a water-dilutable top coat based on polyurethane resin for exterior and interior use. Produces thick-film surfaces, both smooth and structured. ACQUAPUR DS stands out in particular very high surface hardness and scratch resistance, good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well A very good colour stability.

ACQUAPUR DS 2K-finishing enamel matt is a water-dilutable top coat based on polyurethane resin for exterior and interior use. Produces thick-film surfaces, both smooth and structured. ACQUAPUR DS stands out in particular very high surface hardness and scratch resistance, good resistance to diluted chemicals, hand perspiration, coolant up to 50 °C, cleaning agents, hydraulic oils and as well A very good colour stability.

BLENDA^®-LUX is a water-dilutable and highly durable 2-component coating based on polyacrylate using chemical crosslinking with a special aliphatic isocyanate hardener. BLENDA^®-LUX has excellent adhesion properties on a wide variety of substrates and the coatings have excellent hand perspiration resistance as well as scratch and abrasion resistance. BLENDA^®-LUX is economical and ecological and the coatings are extremely hard wearing, block resistant and non-yellowing. For outdoor use, a very high weather resistance as well as colour and gloss retention is achieved.