TURM is a high-quality liquid tranleather oil for leather preservation. Nourishes, cares for and protects smooth leather and makes it soft, supple and waterproof.

COROL belt oil is an ideal adhesion and preservation agent for the care of leather belts. Regular use prevents the belt from slipping and sliding on the transmission as well as premature ageing. COROL is extremely economical to use and does not cause sticking.

The AQUASTATIC is a universally applicable flocculation powder. It forms macro-flocs and thus easily filterable sludges in one step, as the electrically charged polymers exert attractive forces on the opposite charges of the wastewater pollutants. In addition to polymers, these combined flocculants contain natural alumina (bentonites and ceolites), which has a diverse wastewater treatment effect. One addition of AQUASTATIC as the last step of the wastewater treatment before sludge dewatering is sufficient. AQUASTATIC is also used to destabilize oil emulsions, but also for the adsorption of organic hydrocarbons and precipitation of phosphates, sulphates etc.

Normally, liquid painting is carried out in front of water-sprayed spray walls or in painting cabins. In any case, the paint overspray is converted into an aqueous phase and must be removed from this phase again in order to be able to circulate the water. For this purpose PAINTEX coagulant is added to the circulating water. The detackified paint particles are then separated from the water in a calming zone by adding flocculants and discharged. Substances polluting the sprinkling water, such as solvent-containing or water-miscible paint particles and other organic and inorganic substances are coated and coagulated and can thus be removed from the system. At the same time the solvents in the circulating water are bound absorptively. The amount of circulating water is thus increased considerably, and disposal and cleaning costs are significantly reduced.

Odour destroying concentrate. Dosage 0,2 % to 0,4 %.

BLENDA^® is a drying accelerator for aqueous facade paints. BLENDA^® drying accelerator WV-500 extends painting times in outdoor areas in climatic, critical conditions such as high humidity, low temperatures and weather changes to rain.

For accelerating the drying of paints and oil-containing binders and for dry activation of old synthetic resin paints.

CREAFECT increases the application time for final coats of decorative and effect work such as sponge, glaze or structure techniques. Suitable for all aqueous products. Addition: up to 2,5 % of the finished colour.

Elastifying additive for the final coat of synthetic resin enamel paints on wood in exterior applications.

For the addition of solvent-containing lacquers in the event of silicone problems. Do not add more than 1 %.

Additive for the enlargement of the hammer blow effect. Addition: 0,3 %