Knuchel Farben
Parent company with production and development for the areas of building protection, wood as well as automotive and industrial coatings.
Eclatin
Subsidiary specialized in high quality painting and coating systems for industry, steel and hydraulic engineering as well as in many special fields.
RUBApaint
Knuchel Farben LTD well-known brand for building protection products. Serves as a secondary brand, where an independent appearance should be possible.
19
Support products

19.1    Stripping and lye products

401 FLUIDA
paint stripper «FUTURA»
FLUIDA is a gel-like, highly effective, CHC-free scouring paste for the removal of old paint coats. FLUIDA easily dissolves oil paints, synthetic resin and nitro paints, acrylic paints and 2-component lacquers. FLUIDA has a very good depth effect, excellent dissolving and swelling properties and good stability on vertical surfaces.
Further information
96 FLUIDA
paint stripper «RAPID»
FLUIDA is a gel-like, highly effective, CHC-free scouring paste for the removal of old paint coats. FLUIDA easily dissolves oil paints, synthetic resin and nitro paints, acrylic paints and 2-component lacquers. FLUIDA has a very good depth effect, excellent dissolving and swelling properties and good stability on vertical surfaces.
Further information
399 FLUIDA
paint stripper «RAPID LIQUID»
FLUIDA is a liquid, highly effective methylene chloride and VOC-free paint stripper for the removal of old paint. FLUIDA easily dissolves oil paints, synthetic resin and nitro paints, acrylic paints and 2-component lacquers. FLUIDA has a very good depth effect and excellent dissolving and swelling properties.
Further information
2610 GEIGER SE-1
leachers
For thorough substrate preparation of heavily soiled ceilings and walls caused by nicotine and greasy soot; exterior facades soiled especially by sulphur dioxide and heating oil must be thoroughly cleaned. SE-1 is also suitable for removing wax from wall surfaces and can also be used in airless devices. Special insulation is not necessary. The hiding power of the paint is fully given.
Further information
2620 GEIGER TEX
wallpaper stripping concentrate
Highly concentrated in powder form. For easy removal of normal wallpaper, glue paints and smudge-proof binder paint. The new active ingredient dissolves all wallpapers quickly and safely without pretreatment. Special additives ensure that the wallpaper is evenly wetted without the liquid running off.
Further information
2625 GEIGER
ingrain wallpaper stripper
Removes all ingrain wallpapers (also multi-coated) without any problems even without using the spiked roller, sandpaper etc. Also for removing wallpaper that is difficult to remove, such as textile and vinyl wallpaper. Without use of the spiked roller, even with ingrain wallpaper that has been coated several times, and thus considerably less processing time. Extremely high peeling force due to special additives and therefore no running off on the wallpaper.
Further information
2713 GEIGER
silicone joint remover
Geiger Silicone Joint Remover is a pasty compound which is applied thickly in at least 1mm thickness to silicone sealants and silicone adhesives and removed from a wide variety of substrates by simply wiping.
Further information
2630 GEIGER OXYD
wood bleaching powder
For the brightening of woods of all kinds. Old woods that have turned black become as good as new again. Oxide wood bleaching powder is ideal for removing discoloration from oak, ash, teak, nut, pine, pitchpine, rosewood, etc. Even woods painted with oil paint regain their natural colour. Highly recommended for the renovation of your sauna. For removing welding edges. OXYD Wood Bleaching Powder has a very strong fungicidal effect, destroying mould and fungi in one step.
Further information
608 NEUTRALAN
wood graying gel
NEUTRALAN wood graying gel cleans intensively and removes the greying effect by lightening the wood and restores its natural appearance. It freshens up wood that has been exposed to UV radiation and weathering and enables the greyed wooden surfaces to be restored to their original colour.
Further information
782 Ammonia
Further information
690 Hydrogen
peroxide
Further information
781 NEUTRACID
hydrochloric acid
NEUTRACID is a highly effective cleaning agent and dissolves lime, grease, rust and cement residue effortlessly. It can also be used for pickling, etching and soldering in metal processing or for roughening galvanized surfaces. Due to its corrosive nature NEUTRACID must be used with extreme caution and the safety instructions must be observed.
Further information

19.2    Cleaning and degreasing agents

398 PUROL
active cleaner concentrate
PUROL is an alkaline, low-foaming and phosphate-free, water-based intensive cleaner. It serves as a universal cleaning and degreasing agent as well as for the pre-treatment of old coatings and, due to its alkalinity, removes a wide variety of impurities efficiently and safely. The PUROL concentrate is diluted with water before use, depending on the requirements and degree of soiling. The PUROL solution is gentle to the surface and sensitive materials can be cleaned without any problems. Only undiluted application on surfaces made of aluminium, zinc, plastics etc. should be avoided. PUROL was developed especially for machine application. Wherever foam is disturbing, PUROL can be used without hesitation.
Further information
396 NEXOL
care cleaner concentrate
NEXOL is an aqueous and multifunctional care concentrate for high-performance and environmentally friendly cleaning, based on renewable raw materials. It serves as a cleaning and degreasing agent and cares and nourishes at the same time. The treated surfaces do not become dull and matt, but regain their original freshness. The NEXOL concentrate is diluted with water before use, depending on the requirements and degree of soiling. The NEXOL solution is gentle to the surface and sensitive materials can be cleaned without any problems. Only undiluted application on surfaces made of aluminium, zinc, plastics etc. should be avoided. NEXOL was developed especially for machine application. Wherever foam is disturbing, NEXOL can be used without hesitation.
Further information
611 NEUTRAMAT
surface activator
NEUTRAMAT is a highly effective solution of inorganic acids for the surface treatment of silicate-bonded substrates and metals. The reaction of NEUTRAMAT with the silicate components creates microscopically small pores, which increases the adhesive strength of a subsequent paint or coating system. The treated surfaces generally meet the requirements of wet slip resistance according to DIN 51130 and BGR 181 (formerly ZH1/571 – slip resistance class R9).
Further information
613 DUROX
stone cleaner
DUROX is a highly effective concentrate for the removal of lime and cement residue (sinter skin) and as a cleaning agent for metal and natural stone. The high efficiency, also in connection with oily and greasy contamination, is based on the low acidity of PH-1. In this way, the adhesion-inhibiting sinter skin (cement residue) or lime residue is removed cost-effectively and the adhesive strength of a subsequent painting or coating system is increased.
Further information
612 NEUTRASOL
cement floor cleaner
NEUTRASOL is a highly effective concentrate for the removal of lime and cement residue (sinter skin) and as a cleaning agent for metal and natural stone. The high efficiency, also in connection with oily and greasy contamination, is based on the low acidity of PH-1. In this way, the adhesion-inhibiting sinter skin (cement residue) or lime residue is removed cost-effectively and the adhesive strength of a subsequent painting or coating system is increased.
Further information
620 NEUTRASAN
vegetable oil soap
NEUTRASAN is a gentle cleaning concentrate on a plant soap basis for regular wiping care of all natural surfaces indoors. With NEUTRASAN the surfaces can be cleaned easily and intensively without damaging the surface. Thanks to the regreasing effect, the materials regain their natural freshness and colour.
Further information
2711 GEIGER
anti-graffiti cleaner
The Anti Graffity cleaning agent infiltrates spray paints, paints and felt-tip pens on all solvent-resistant surfaces (such as metal, glass, wood, tiles, unpainted concrete, clinker bricks and natural and artificial stones) and thus serves to remove paint smears and unwanted graffiti. In the case of painted or varnished surfaces, the substrate can also be detached. In the case of non-solvent resistant substrates, compatibility must be checked. It is recommended to protect the cleaned surfaces with Anti Graffity Finish or Anti Graffity Protective Varnish.
Further information
2715 GEIGER
facade and stone cleaner
It is universally applicable for acid-sensitive or alkaline reacting stone facades. GEIGER facade cleaner is weakly alkaline with a low PH value and therefore not subject to classification according to the Working Materials Ordinance.
Further information
2716 GEIGER
zinc and aluminium cleaner
The product is used for cleaning, degreasing and pre-treatment of preferably galvanized parts / surfaces. In addition to cleaning and degreasing, treatment with zinc and aluminium cleaner prepares the top layer of the zinc coating, especially in the case of freshly hot-dip galvanised parts, for the subsequent coating. The natural protective coating on weathered galvanized parts is not negatively affected.
Further information
2720 GEIGER
cement haze remover-limescale remover
For easy cleaning and removal of lime and cement residue, inorganic soiling and flash rust, also in combination with oily and greasy soiling. For cleaning acid-resistant surfaces such as wall and floor tiles, brick and clinker surfaces, porcelain stoneware in sanitary facilities, swimming pools, kitchens, car wash halls, clinker facades. Check compatibility when used on bathroom fittings. Degreasing and strongly dirt dissolving.
Further information
2722 GEIGER DIP
dispersion stain remover
Highly effective for the removal of all dispersion stains (even those that have already dried through), dispersion adhesives and adhesive residues from masking tapes. DIP removes all paint stains, dispersion paints, varnishes and oil paints from all solvent-resistant surfaces such as masonry, wood, glass, textile floors, even if they are already thoroughly dry. For plastic and painted surfaces, compatibility must be checked in an inconspicuous place.
Further information
2725 GEIGER
adhesive remover
Geiger adhesive remover removes all adhesive bonds such as all-purpose adhesive, foam adhesive, wood glue, dispersion adhesive, self-adhesive labels and adhesive residues from masking tapes, etc. Floor covering residues (e.g. compact foam and felt residues) that remain behind when removing can be completely removed with this. Coating residues and adhesives are removed in one operation. Due to the excellent dissolving properties, oils and greases can also be removed from metal, wood, stone and glass.
Further information
2727 GEIGER Profi-Star
universal cleaner
Easily biodegradable cleaning concentrate for all washable surfaces. Profi-Star cleans strongly and removes difficult to remove dirt of all kinds without etching and thus maintains the natural shine of the surface. Removes all soiling and is 100 % degreasing. Particularly suitable for e.g. painted surfaces, carpet and upholstered furniture, kitchen appliances, plastic surfaces etc. Also suitable for cleaning floors (stone tiles and linoleum), window frames and all washable surfaces.
Further information
2728 GEIGER
special plastic & plastic cleaner
The highly effective cleaner for all plastic and synthetic surfaces for household, commercial and leisure use. Strongly dirt dissolving and yet surface-friendly, very good biodegradability and non-caustic.
Further information
2740 3M Cleaner
cleaner spray on lime basis
Very suitable for coarse, difficult to remove contaminants such as adhesive residues from films, adhesive tapes and labels. Also for removing grease and oil. Cleans neutrally (pH 7,5) and gently on a variety of surfaces.
Further information

19.3    Fillers

2805 TOUPRET
powder filler interior «Le Reboucheur»
Powdery gypsum-based putty, raw materials from selected stone pits and plastic-modified. White when stirred. Ideally suited for repairing large and small cracks and holes on untreated or painted interior surfaces. Adheres to painted substrates. Fast setting time: 30 minutes, layer thickness unlimited. Easy to grind. Suitable for use with screws or nails. Very fine.
Further information
2810 TOUPRET
powder filler interior «TX 110»
Powder filler on the basis of cement, raw materials from selected quarries and plastic-modified. High white when stirred. Ideally suited to quickly and reliably repair large and small cracks and holes on untreated or painted interior surfaces. Quick recoatability. Adheres to all substrates. Fast setting time: 30 minutes, layer thickness unlimited. Easy to grind. Suitable for use with screws or nails.
Further information
2815 TOUPRET
quick renovation filler interior «Cachet Blanc»
Powdery putty made of high-quality, bonded mineral fillers. White when stirred. Ideally suited for large-area pre-treatment of damaged, old and uneven interior surfaces. These can be pre-painted or untreated. Up to 5mm layer. Adheres to painted substrates. Time saving: Second shift after 3 hours. Processing time 2,5 hours. High coverage. Easy to process.
Further information
2830 TOUPRET
interior levelling filler «TX120» Confort+
Pasty putty with very fine calcium carbonate based fillers. High white when stirred. Ideally suited for the rapid prefilling of damaged or untreated or pre-coated substrates. Manual and airless. Layer up to 5mm. High filling power. No cracking. Adheres to painted substrates. Easy to process.
Further information
2816 TOUPRET
finish-smoothing filler interior «Cachet Bleu»
Powdery putty made of high-quality, bonded mineral fillers. High white when stirred. Ideally suited to create a perfect surface on large painted or untreated surfaces. Up to 1mm - layer. Adheres to painted substrates. Can be painted over after 24 hours. Improves quality of subsequent coats. Easy to process. Extra-white.
Further information
2811 TOUPRET
Airspray LEVEL & FINISH 2 in 1
Paste-like, airless levelling and smoothing filler for interior use based on calcium carbonate fillers and binders. Highly covering with optimum open time and fast sanding. Suitable for raw or painted substrates such as plaster, plasterboard, exposed concrete, lightweight brick, cement, plaster, etc.
Further information
2820 TOUPRET
repair putty outside «MUREX»
Cement-bound, powdery filler compound, polymer-modified, with high-quality mineral fillers. White when stirred. Ideally suited to quickly and reliably repair large and small cracks and holes on untreated or painted outdoor surfaces. Extraordinary adhesion. Fast setting time - 30 minutes. Can be painted over after 24 hours. Coating thickness unlimited. Highly paid. Suitable for use with screws or nails.
Further information
2825 TOUPRET
levelling filler outside «PLANIREX»
Cement-bound, powdery filler compound, polymer-modified, with high-quality mineral fillers. White when stirred. Ideally suited for levelling out irregularities on dry, untreated or damaged large-area outdoor surfaces. Up to 3 shifts per day. Time saving - second shift after three hours. Can be painted over after 24 hours. Adheres to painted substrates. Easy to grind. Suitable for use with plugs, nails or screws. Weiss.
Further information
2826 TOUPRET
filler and repair filler exterior «FIBAREX»
Powdery and fibre-reinforced exterior putty based on cement and selected mineral fillers and binders. Suitable for filling, repairing and levelling. Very strong adhesion and resistance, permeable to water vapour and quick to paint over (24 hours).
Further information
2835 TOUPRET
rapid lightweight putty «REDLIGHT» interior
Paste-like putty based on acrylic polymers. Ideally suited for filling and smoothing holes and small defects in a layer in the interior. Filling and smoothing in one layer. Doesn't collapse, no need to grind. Quick recoatable within 30 minutes. High white.
Further information
2834 TOUPRELEX
lightweight filling plaster exterior
Exterior paste plaster, based on lightweight fillers and resins. Ready to use, fills and smoothes in one go, can be covered after 1 hour.
Further information
2836 TOUPRET
window putty
Linseed oil putty. Ideally suited as a window putty and for repairing cracks in wooden parts before painting. Does not stick to the hands. Permanently elastic. Easy to process. No danger of hairline fractures. Compatible with acrylic paints. Long shelf life in the container.
Further information
2845 DECOMUR
superadhesive filler
decomur Super Adhesion Filler is excellently suited for the full-surface filling of ceilings and walls, for filling cracks, joints and holes as well as for gluing and gouging plasterboard and gypsum fibreboards. Synthetic resin and fibre reinforced, optimum adhesion on many substrates, crack-free setting, can be pulled out to zero, even curing in any layer thickness.
Further information
28470 DECOPLAST
mineral and non-absorbent surface filler V30
Synthetic resin and cement-based plaster for filling holes and cracks, gluing, smoothing, repairing and restoring facades, walls and ceilings. Exterior and interior. Fibre- reinforced. White. Adheres even to blocked substrates such as earthenware and paint without sanding or priming. Can be applied during. Approx. 30 minutes. And from 0 to over 10 cm per coat. Dries without cracks or shrinkage.
Further information
2846 DECOTRIC
Fast-setting cement
Grey, fast-setting special cement for interior and exterior use. For quick repair of chippings, cracks and holes in plaster, concrete, cement screed and similar mineral substrates as well as for fixing and securing building components. Approx. 3 minutes application time, weather and water resistant, quick loadable.
Further information
2838 WIEROspac AQUA
wet room filler
WIEROspac AQUA is a ready-to-use wet room filler. Its grey-blue mineral-based filler is based on the highest quality dolomite marble and has been developed specifically for wall and ceiling surfaces in wet rooms. The higher binder content enables optimum adhesion to a wide variety of substrates with a high load-bearing capacity and hard surface.
Further information
2850 AHRWEILITH
hybrid surface filler
Ahrweilit Filler is an easy to use hybrid surface filler for wood and metal in interior areas. It is characterized by high yield and long open time, so that even large areas can be filled without any effort. Overpaintable after 3–4 hours with acrylic, synthetic resin and emulsion paints.
Further information
2855 AHRWEISSAL
synthetic resin surface filler
Ahrweissal Kunstharzspachtel is an easy to use filler for wood and metal in interior and exterior areas. It is characterised by particularly easy processing and high yield. Highest covering and filling power. Overpaintable after approx. 12 hours with acrylic, synthetic resin and emulsion paints.
Further information
2854 AHRWEITEX
plastic quick putty
For filling small holes and cracks, for pore removal of new wood and for repairing scratches in well primed metal. Fast drying, good filling capacity and good elasticity. Ahrweitex- Quick Filler can be applied several times in a short time on top of each other. After drying, it can be easily sanded and is characterized by its white color. Maximum wet film thickness 1000 µm.
Further information
28 DUROFIL
acrylic quick putty
DUROFIL is a water-dilutable, quick-drying and smooth acrylic fine filler. DUROFIL has a good filling power, can be pulled out easily and remains supple without rolling, even after longer processing (repeated pulling through). After a short drying time, DUROFIL can be applied several times on top of each other and produces a fine, pore-free and stable surface.
Further information
2837 TOUPRET
filler and repair filler for wood «REPAR'WOOD»
Powder putty for the repair as well as for modelling missing wooden parts. Exceptional adhesive strength. Can be carved, planed, sanded, drilled and painted.
Further information
37 SILAFIL
plastic wood
SILAFIL is a fast drying, very filling and transparent wood paste based on nitrocellulose. SILAFIL is characterized by excellent adhesion, low volume shrinkage and fast drying. SILAFIL has a good filling power, can be pulled out easily and remains supple without rolling, even after longer processing (repeated pulling through). After hardening, SILAFIL can be sanded, planed, filed or sawed, stained and repainted.
Further information
2760 PERMAFIX 1190
2K wood repair compound
2-component polyester filler for the permanent repair of structures made of wood, mineral and gypsum fibre boards, metal and plastic. Permafix 1190 can be overpainted with all commercially available water-thinnable or solvent- containing 1- and 2-component products.
Further information
2862 PERMAFIX 1190
dosing unit
Further information
427 RUBAPLAST®
2K-PU elasto filler
RUBAPLAST® is a permanently elastic and shrink-free 2-component filling and modelling compound for filling cracks and holes as well as for patching and shaping. It is characterized by high elasticity, excellent adhesion and sandability as well as low volume shrinkage.
Further information
2871 DenBraven
ACRYL W
Acryl W is a paint compatible, elastic sealant based on an acrylic emulsion. The product is virtually odourless and non-corrosive to metals. Acryl W is suitable for indoor and outdoor use, e.g. joints between wooden, metal window frames and concrete, masonry, gas concrete, metal, anodised aluminium and hard PVC, joints on stairs, walls, concrete and ceiling elements, skirting boards and window sills. The SOS Pressure Pack is used without a putty gun.
Further information
2899 DenBraven
ANTI-CRACK
Anti-Crack is a paint compatible, polyacrylate-based sealant. Anti-Crack prevents cracking and discolouration of coatings on fresh joints. Can be painted over with water- and solvent-based paints and varnishes. Plasticizer-free. Anti-Crack is suitable for indoor and outdoor use, e.g. joints between wooden, metal window frames and concrete, masonry, aerated concrete, metal, anodised aluminium and hard PVC, joints on stairs, walls, concrete and ceiling elements, skirting boards and window sills.
Further information
2872 DenBraven
ACRYL EXTERIOR+
Acryl Exterior+ is quickly rainproof after application. The product is virtually odourless and non-corrosive to metals. Acryl Exterior+ is suitable for indoor and outdoor use: Joints between wooden or metal window frames and concrete and masonry.
Further information
2873 DenBraven
ACRYL WET-ON-WET
Wet-On-Wet is a high quality acrylic sealant specially developed for «wet-on-wet» recoating shortly after application of water-based paints. For sealing and filling of connection joints, seams, cracks and gaps.
Further information
2874 DenBraven
STUC-O-SEAL
Stuc-O-Seal is a one-component polyacrylate-based joint sealant with a coarse-grained structure. The product is virtually odourless and non-corrosive to metals. For interior and exterior use to seal joints and cracks, especially between materials with structured surfaces such as plaster, masonry, polystyrene, etc. Protect from rain for at least 5 hours after application. After curing, the product is weather and rainproof.
Further information
2875 DenBraven
PLASTERBOARD-FILLER
Plasterboard-Filler is a visibly non-shrinking, ready-to-use, ultra-light, ready-mixed filler and smoothing compound for filling and repairing cracks and holes in walls and ceilings. Ideal for filling joints and screw holes on plasterboard.
Further information
2876 DenBraven
SILICONE-NO neutral crosslinking
Silicone-NO is a one-component, neutrally curing and oxime curing construction, glazing and sanitary silicone. After application, the silicone hardens with air humidity to form an elastic sealant. Suitable for sealing joints between precast concrete elements and masonry, sealing facades and glazing systems as well as for joints in kitchens, bathrooms and showers and industrial areas. The product is equipped with antifungal properties.
Further information
2757 ARTEKO
ELASTIK - AE
For outside and inside. Waterproof, extremely elastic jointing material on a 1-comp. basis. Application: Filling, filling, fixing, gluing and sealing of wood, metal, glass, plaster as well as for concrete, lime and cement substrates. ARTEKO ELASTIK is resistant to alkaline influences.
Further information
2877 DenBraven
HYBRISEAL FAÇADE
Hybriseal Façade is a versatile, one-component hybrid-based sealant for sealing construction joints. After application, the product hardens with air humidity. The sealant is neutral and free of silicone and isocyanates. Hybriseal Façade can be used to seal expansion joints between precast concrete elements, masonry and perimeter joints.
Further information
2878 DenBraven
HIGH TACK
High Tack is a one-component hybrid-based adhesive with high initial adhesion. In general it is not necessary to fix the gluing unit. After application, the product hardens with air humidity. The adhesive is odourless, neutral and free of silicone and isocyanate. High Tack is a flexible adhesive for bonding components made of stone, concrete, masonry, glass, mirrors, glazed surfaces, porcelain, epoxy and polyester plates, rigid PVC, polyurethane, stainless steel, anodised aluminium, copper, zinc, lead, painted wood etc.
Further information
2879 DenBraven
HYBRIFIX
Hybrifix is a high quality, strong, one-component, hybrid-based construction adhesive and sealant. After application, the product hardens with air humidity. Hybrifix is odourless, neutral and free from isocyanates. Hybrifix is used for the bonding of panels, skirting boards, window sills, strips, thresholds and insulation materials, as well as a sealant for connection joints in buildings, kitchens and bathrooms, for bodywork and for metallic connection joints. Good UV and weather resistance. Absorbs acoustic and mechanical vibrations.
Further information
2884 PERMAFIX 143
All in one Silicone
Permanently elastic premium silicone-based sealant for sealing connection and expansion joints for almost all building applications. Suitable for all standard building substrates indoors and outdoors, including marble, terrazzo, natural and sensitive artificial stone. Can also be used for bonding and grouting mirrors. Properties: Permissible total deformation 25 %, corrosion-neutral and solvent-free, compatible with natural stone, suitable for areas close to foodstuffs and in clean rooms, high UV and weather resistance, contains fungicidal agents against mould, reduced oxime odour and MEKO-free.
Further information
2886 PERMAFIX 208
PUR tube foam with combi valve
One-component PUR foam, for filling and insulating joints, cavities and wall openings. Completely fills the cross- section by expansion during foaming. The foam can is to be processed with the tube adapter or with a gun. Yield 38/42 litres, filling foam with good insulating properties, building material class B3 (DIN 4102).
Further information
2889 PERMAFIX 235
2K-PU assembly foam rapid
For filling and insulating joints, cavities and wall openings. Suitable for window and door installation. Fills the cross-section completely and in a controlled manner by expansion during foaming. Optimum adhesion to common building materials. Suitable for increased pressure loads. The reaction during curing is independent of air humidity. Foam fabre light green, yield approx. 10 litres free foamed. Building material class B2 (DIN 4102).
Further information
2888 PERMAFIX 251
PUR-filling foam cleaner
For removing fresh foam splashes and cleaning the foam gun. Contains solvents.
Further information
800 BRICAPOLY
polyester universal filler
Highly developed and fast curing 2-component universal putty with excellent direct adhesion on substrates such as galvanised or hot-dip galvanised sheet metal, steel, iron, aluminium, wood, stone, ceramics as well as on most commercially available plastics. BRICAPOLY can be applied easily and without pores (up to approx. 10mm layer thickness), is extremely fast and easy to sand (after approx. 20 minutes). BRICAPOLY can be painted over with all commercially available water-thinnable or solvent-containing 1- and 2-component products. Due to the styrene-reduced formulation, BRICAPOLY does not fall into the group of chemicals class 2. For resale, this means that no expertise course and related advice is required.
Further information
801 BRICAPOLY
polyester glass fibre filler
Extremely adhesive and fast curing 2-component fibre putty consisting of a mixture of high-quality and elastic polyester resins and glass fibres. Suitable for reinforcing rusted sheets and profiles and for bridging holes and cracks on steel, tinned bodywork sheet metal and glass fibre reinforced plastic. BRICAPOLY can be painted over with all commercially available water-thinnable or solvent-containing 1- and 2-component products. Due to the styrene-reduced formulation, BRICAPOLY does not fall into the group of chemicals class 2. For resale, this means that no expertise course and related advice is required.
Further information
802 BRICAPOLY
multi-aluminium polyester putty
BRICAPOLY is an aluminium-containing and elastic 2-component filler and surface filler and achieves heat resistance up to 100 °C. It is suitable for the repair of damaged areas that are exposed to strong vibrations, such as in the automotive repair sector, bodywork and vehicle construction, industrial and plant construction, as well as boats and caravans. BRICAPOLY can be applied easily and non-porous over large areas, can be sanded quickly, easily and with little dust. BRICAPOLY can be painted over with all commercially available water-thinnable or solvent-containing 1- and 2-component products. Due to the styrene-reduced formulation, BRICAPOLY does not fall into the group of chemicals class 2. For resale, this means that no expertise course and related advice is required.
Further information
803 BRICAPOLY
polyester resin
High-quality 2-component polyester resin for bridging and reinforcing holes and cracks with glass fibre fleece, mat or fabric on vehicles, caravans, boat and model building, containers and GRP parts. Due to the styrene-reduced formulation, BRICAPOLY does not fall into the group of chemicals class 2. For resale, this means that no expertise course and related advice is required.
Further information
804 BRICAPOLY
polyester repair kit
High-quality 2-component polyester resin for bridging and reinforcing holes and cracks with glass fibre fleece, mat or fabric on vehicles, caravans, boat and model building, containers and GRP parts. Due to the styrene-reduced formulation, BRICAPOLY does not fall into the group of chemicals class 2. For resale, this means that no expertise course and related advice is required.
Further information
805 BRICAPOLY
polyester multi-function filler Multi-Blue
Multi Blue is a polyester putty of the latest generation. State-of-the-art fillers, very thixotropic properties, optimum sanding properties and up to 20 % higher removal volume compared to conventional fillers. Very good direct adhesion on aluminium and steel surfaces, on galvanized steel sheet as well as polyester laminates and wood. BRICAPOLY can be painted over with all commercially available water-thinnable or solvent-containing 1- and 2-component products.
Further information
808 BRICAPOLY
hardener to polyester
Hardener tubes for BRICAPOLY polyester putty.
Further information
424 BRICAPOLY
polyester long term filler
BRICAPOLY can be applied easily and non-porous over large areas, can be sanded quickly, easily and with little dust. Very good direct adhesion on aluminium and steel surfaces, on galvanized steel sheet as well as polyester laminates and wood. BRICAPOLY can be painted over with all commercially available water-thinnable or solvent-containing 1- and 2-component products.
Further information
808 BRICAPOLY
hardener to polyester
Hardener tubes for BRICAPOLY polyester putty.
Further information
2890 AKEMI
2K polyester resin
AKEMI repair resin with adhesive additive is a mixture of unsaturated polyester resins dissolved in styrene and a special adhesive additive.
Further information
423 BRICACAR
exhaust repair paste
BRICACAR is a paste-like and asbestos-free filler for the repair of holes and cracks in exhaust systems.
Further information
810 DUROVIT
acrylic fine putty
DUROVIT is a ready-to-use, plasto-elastic and age-resistant one-component joint sealant on an acrylic resin basis for interior and exterior use. DUROVIT is characterized by high weather and light resistance and remains permanently elastic over a very wide temperature range from -20° to + 75 °C.
Further information
811 ELOTOP
acrylic texture filler
ELOTOP is a ready-to-use, plasto-elastic and age-resistant one-component joint sealant on acrylic resin basis with a structured, rough and plaster-like surface for interior and exterior use. ELOTOP is characterized by high weather and light resistance and remains permanently elastic over a very wide temperature range from -20° to + 75 °C.
Further information

19.4    Adhesives

218 CREAFIX
universal white glue
For the household and for handicrafts. Glues paper, cardboard, wood, leather, fabrics, artificial leather, foam, cork, etc. Apply CREAFIX on one side and join immediately.
Further information
2907 BLANCOL
wallpaper primer
BLANCOL is a water-dilutable and colourless wallpaper primer for problematic surfaces. It consolidates the substrate to be wallpapered, prevents crumbling and regulates the suction power. Strengthens the adhesion of the wallpaper and helps to prevent wallpaper peeling. Does not attack solvent-sensitive polystyrene insulations.
Further information
2905 BLANCOL
fish paste
For wallpapering paper and woodchip wallpaper. Also suitable for making masks, figures and objects from paper pulp and for fixing wallpaper.
Further information
2908 GLUTOLIN HS
hard foam adhesive
Hard foam adhesive for insulation boards in the interior. High initial adhesion and secure adhesive strength. Also suitable for humid rooms.
Further information
2910 GLUTOLIN 77
special paste
Special paste with methyl cellulose. For heavy wallpaper and woodchip wallpaper that can also be dry stripped.
Further information
2920 3M SprayMount
spray adhesive
The non-ageing spray adhesive adheres immediately and securely, is colourless, leaves no stains and can be repositioned during the bonding process.
Further information
2940 PERMAFIX 1166
PUR volume adhesive
For bonding building materials with large bonding surfaces as well as insulation boards, dry construction boards, wooden constructions and masonry blocks. Rapid curing and therefore rapid further work. Levels out unevenness. 1 can corresponds to approx. 25 kg of adhesive mortar. Cures after 2 hours.
Further information

19.5    Nets, fleeces, cork, fillings

2951 BRICAPOLY
glass fibre mat
Mat made of pressed glass fibres is characterised by a high inherent stability. Serves to repair holes and more severe damage to corners, edges and curves in metal and GRP parts in combination with laminating and repair resin.
Further information
2952 BRICAPOLY
glass fibre fabric
Consists of braided glass fibres. Used to repair holes in combination with laminating and repair resin on car body and GFRP parts that are exposed to high loads.
Further information
2953 BRICAPOLY
glass fibre fleece
Pressed glass fibre fleece without inherent stability to achieve fine and smooth surfaces. In combination with the repair resin, it is suitable for repairing minor damage to GRP parts.
Further information
2955 AKEMI
glass fibre mat
Mat made of pressed glass fibres is characterised by a high inherent stability. Serves to repair holes and more severe damage to corners, edges and curves in metal and GRP parts in combination with laminating and repair resin.
Further information
2956 AKEMI
glass fibre fabric
Consists of braided glass fibres. Used to repair holes in combination with laminating and repair resin on car body and GFRP parts that are exposed to high loads.
Further information
846 CREAFIBRE
fibre filler
Additive for water or solvent based products for bridging small cracks. Add 300g per 20 kg bucket.
Further information
2957 KOBAU
Fibreglass joint tape
KOBAU glass fibre joint corner strips are used to bridge joints in dry construction with plasterboard or wood fibre boards. KOBAU glass fibre joint corner strips are joint tapes made of glass fibres. Can only be used indoors.
Further information
2958 PERMAFIX 390
joint crack tape self-adhesive
Fabric strip made of glass fibres as joint crack tape for filling over panel joints in dry construction and for cracks. Alkali-resistant, self-adhesive on one side, thickness 0.2 mm - 0.3 mm.
Further information
2960 PERMAFIX 350 SPEZ
Reinforcement fabric
As a fabric insert in full thermal insulation facades (VWS) and reinforcement in thin-layer plasters. Tested according to ETAG No. 004. Alkali-resistant, displacement-resistant, mesh size 4 x 4mm.
Further information
2970 Fabric angle
with PVC angle
Fabric angle with perforated PVC edge protection. Ideal for full thermal insulation facades. Mesh size 4x4mm.
Further information
2980 PERMAFIX 601
filling strips PE round
Extruded polyethylene foam PE round cord with closed cell structure and smooth surface. The fine pores give the product an extremely smooth character. Suitable for backfilling the joint sealant in expansion joints, for connections of window and door frames, for dilatation joints of buildings, retaining walls and for connection joints in bathrooms, kitchens, floor coverings, etc.
Further information
2990 Cork
strips
Cork strips are best suited for elastic connection to other components and provide the necessary sound insulation.
Further information

19.6    Maintenance articles

66500 BENDUROL ULTRA
basic cleaner strong
For the removal of old and compacted dispersion layers. For alkali-resistant floors, such as PVC and stone. Low-odour, as it is ammonia-free.
Further information
66510 INDUR XL
fresh
Leaves behind a dirt-repellent film, without layer structure. For all glossy, coated, but also uncoated floors. Powerful cleaning in combination with perfect care.
Further information
6652 XENSE
floor & surface
Leaves a pleasant orange scent when cleaning. Also suitable for glossy surfaces, pH-neutral adjustment. Can be used both as a floor and surface cleaner.
Further information
6653 PER VETRO
glass and mirror cleaner
For the efficient cleaning of all glass and mirror surfaces. There are no cleaning strips. Set ready for use.
Further information
6654 INTO Forte
sanitary cleaner
Also removes rust runs and flash rust. Dissolves lime and urine stone, mortar and iron residues. Gently cleans stainless steel.
Further information
66550 MAXX Forte 2
universal basic cleaner
Powerful basic cleaner with the pH value of an all-purpose cleaner. For all water-resistant floors, also suitable for linoleum. Low-foaming, therefore also suitable for use in automatic machines.
Further information
67050 NEOMAX N
detergent for scrubbers
For all shiny and matt floors. Leaves no visible residue. Ideal for rubber / and rubber studded floors.
Further information
67060 MURIL
industrial cleaner
For alkali- and alcohol-resistant floors, such as PVC and stone. For extremely heavy and greasy soiling. Excellent cleaning performance.
Further information
66560 INTO WC SUPER
WC basic cleaner
Especially powerful for basic and intermediate WC cleaning. Against limestone, rust, urine stone and other dirt. Contains hydrochloric acid.
Further information
66570 CHROMOL
stainless steel care
Cares for, cleans and protects stainless steel. Leaves a beautiful shine on the surfaces.
Further information
66580 Drain
cleaner
Further information
66600 3M
microfibre cloth 2012
Further information
66620 R40
microfibre cover
Further information
66630 R40
rash cover
Further information
66640 Special
wipe premium
The durable cleaning cloths are extremely absorbent and can even be used several times without tearing. As a result, the consumption of cleaning cloths is reduced. These cleaning cloths fit into the Tork single cloth dispenser. As the cloths are not particularly fluffy, they are ideal for sensitive surfaces. Non-woven, 1-ply, unembossed, white.
Further information
66650 TORK
toilet paper Midi Advanced
Tork Midi toilet paper is coreless and therefore produces no waste. Thanks to its high capacity, this 2-ply toilet paper is the ideal solution for low- to medium-frequency toilets. Mixed quality, 2-ply, without core, roll of 900 sheets, 112.5 running metres.
Further information
6668 WC
paper neutral 3-ply
Further information
66970 TORK
toilet paper Minijumbo Advanced
Tork mini Jumbo Toilet Paper Advanced is soft and gentle. Thanks to its high efficiency, consumption is reduced compared to conventional toilet paper. Thanks to its high capacity, this 2-ply toilet paper is the ideal solution for medium to high-traffic toilets. The price-performance ratio is excellent. Recycled, 2-ply, white, 10 x 20cm, roll of 850 sheets, 170 running metres, decorative embossing.
Further information
66790 SmartOne
toilet paper
As the Tork SmartOne toilet paper has an extremely high capacity, it can be used for washrooms with high user frequency. The single sheet removal leads to a reduction in consumption. The decrease in toilet paper consumption and the fast disintegrating paper reduces the risk of drain blockages. A removable (SmartCore) core simplifies and speeds up refilling. Roll of 1150 sheets.
Further information
66690 TORK
cleaning cloth 530 Premium
These extra-strong cleaning cloths are a particularly tear-resistant and absorbent product. Oil, water, grease and stains can be wiped away with most common solvents. Thanks to their thickness, they also protect hands from hot surfaces and sharp edges. They can be combined with various dispensers. Non-woven, 1-ply, roll of 280 sheets, unembossed.
Further information
66700 TORK
towel roll Matic Premium H1
Thanks to its high capacity, this roll towel is the ideal solution for busy toilets. The single sheet dispenser helps to minimise consumption and ensures hygiene because only the sheet to be removed is touched. The paper is highly absorbent and very soft. This towel is characterised by its high quality.
Further information
66670 TORK
napkins LinStyle Premium
Airlaid napkins combine the advantages of a cellulose napkin with the beauty of a cloth napkin. They are easy to fold, stable and highly absorbent. Their textile and fabric-like texture creates an elegant atmosphere.
Further information
66710 Towel
zigzag crepe
Tork Zigzag Towel Universal is a soft and high-quality folded towel, suitable for Tork Zigzag dispensers. The single sheet dispensing helps to minimise consumption and ensures hygiene because only the sheet to be removed is touched.
Further information
67040 Towel
V-fold
Fast-dissolving folding towel for high-traffic washrooms on campsites, nightclubs, schools, etc.
Further information
66720 Blue-Power
maxi cleaning cloth roll
Highly absorbent and tear-resistant cleaning cloth rolls for soaking up liquids, cleaning surfaces and wiping hands. Roll of 500 sheets.
Further information
66740 WYPALL
paper wipes L20 Extra+
The Wypall L20 Extra wipes can be used universally and are suitable for medium-duty cleaning tasks, polishing glass, cleaning tools and wiping smooth surfaces. The wipes have a high absorption capacity of liquids and are ideal in areas with high consumption, as the wipes are economical in use. Roll of 500 sheets.
Further information
66750 KIMTECH
wipes 1/4 fold
Kimtech Pure wipes can be used universally and are suitable for dry cleaning of surfaces in the pharmaceutical, biotechnology, medical device manufacturing and food sectors. The particularly powerful wipes are supplied in water-resistant bags.
Further information
66770 Dispenser Midi
for central withdrawal
Further information
66780 TORK
wipe 440 TAD
Tork cleaning cloths are suitable for wiping up all surfaces and protect hands from heat and metal shavings. They have a high absorption capacity for oil and liquids and are also extremely tear-resistant. Roll of 750 sheets.
Further information
66990 TORK
paper wipes Universal midi
The standard cleaning cloths are suitable for simple wiping work and for wiping hands. The wipe roll is compatible with all Tork internal dispensers of the M2 system. Certified for contact with food. Recycled, 1-ply, inner roll, unperforated, unembossed.
Further information
66960 TORK
kitchen roll
The extra absorbent household roll is ideal for the usual wiping work on surfaces and for wiping up water, oil and food residues. The surface dries quickly. Roll of 51 sheets.
Further information
66800 SIPAEC
hygienic scrubber hard
Further information
66810 SIPAEC
glass fibre handle white
Further information
66820 SIPAEC
replacement broom in PVC
Further information
66830 SIPAEC
spray bottle single
Further information
66840 SIPAEC
spray head
Further information
66850 SIPAEC
anodised aluminium handle
Further information
66860 SIPAEC
raster holder R40
Further information
66870 SIPAEC
dosing pump
Further information
66880 SIPAEC
scrubbing kit complete
Further information
66890 SIPAEC
scrubbing brushes pressed in Union
Further information
66900 SIPAEC
household broom
Further information
66910 SIPAEC
industrial broom
Further information
66920 SIPAEC
rice broom strong
Further information
66930 SIPAEC
wooden handle with thread
Further information
66940 SIPAEC
polypropylene sweeper set
Further information
67010 SIPAEC
sweeper set with long handle
Further information
66950 SIPAEC
aluminium handle for set
Further information
67020 SIPAEC
mop fringes white
Further information
6698 OKS Quickbag
refuse sacks
Further information